You are viewing an old revision of this post, from May 18, 2014 @ 13:16:54. See below for differences between this version and the current revision.

Bill of Material (BOM) Detail

The following are the Details in the BOM Detail section

Sl.No	Serial number of the materials/items. Auto generated
Stage	Some of the production process requires items in stage basis. All the items may not be required at the initial stage itself. By identifying at what stage the particular item is required in the production process, we can do much more effective planning.Select the stage in which the item is required.
Type	Normally the material details are entered in Item level. (default)Goodbooks facilitates option to specify the details at a higher level like Category, Sub category and Group. At the time of transaction, user can select the exact item belonging to that type. Please note this option is useful for Generic KIT.
Item Code & Name and SKU	Select the material used in the production.In the case of items having multiple stock keeping unit (SKU), user should select the required SKU.For material type specified as Category, Subcategory or group System will show the corresponding list of values. Please note this option is useful for Generic KIT.
Req. Quantity	Quantity of material required to produce the product (per unit of output).
Calc. Quantity	Quantity of material required to produce the product (for the required output qty). This will be same as above ,if the planned production qty is 1.
Waste %	Wastage ,if any , that may occur in the production process can be mentioned as % here.
Net.Reqd	Quantity of material required including waste%. Auto calculated.
Adj.Qty	Manual Addition or reduction of quantity, if any
Final Qty	Actual quantity of material required. Auto calculated.
Nature	The classification material during the process is specified. Items marked under Input categories are used for requirement calculation and items marked under Output ,Scrap, By product are used as a norm.

s

Contents

Revisions

May 20, 2014 @ 02:57:13 [Current Revision] by vv
May 18, 2014 @ 13:17:59 [Autosave] by vv
May 18, 2014 @ 13:16:54 by vv
May 18, 2014 @ 13:16:10 by vv
May 18, 2014 @ 13:15:34 by vv

Revision Differences

--- May 18, 2014 @ 13:16:54
+++ Current Revision
 Unchanged: The following are the Details in the BOM
 Unchanged: <strong>Detail section</strong>
 Unchanged: <table border="1" cellspacing="0" cellpadding="0">
 Unchanged: <tbody>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Sl.No</td>
 Unchanged: <td valign="top" width="439">Serial number of the materials/items. Auto generated</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Stage</td>
-Deleted: <td valign="top" width="439">Some of the production process requires items in stage basis.  All the items may not be required at the initial stage itself.  By identifying at what stage the particular item is required in the production process, we can do much more effective planning.Select the stage in which the item is required.
+Added: <td valign="top" width="439">Some of the production process requires items in stage basis.  All the items may not be required at the initial stage itself.  By identifying at what stage the particular item is required in the production process, we can do much more effective planning.Select the stage in which the item is required.&nbsp;</td>
-Deleted: &nbsp;</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Type</td>
 Unchanged: <td valign="top" width="439">Normally the material details are entered in Item level.  (default)Goodbooks facilitates option to specify the details at a higher level like Category, Sub category and Group.     At the time of transaction, user can select the exact item belonging to that type.  Please note this option is useful for <strong>Generic KIT.</strong></td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Item Code &amp; Name and SKU</td>
-Deleted: <td valign="top" width="439">Select the material used in the production.In the case of items having multiple stock keeping unit (SKU), user should select the required SKU.
+Added: <td valign="top" width="439">Select the material used in the production.In the case of items having multiple stock keeping unit (SKU), user should select the required SKU.For material type specified as Category, Subcategory or group
-Deleted: For material type specified as Category, Subcategory or group
 Unchanged: System will show the corresponding list of values.   Please note this option is useful for <strong>Generic KIT.</strong></td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Req. Quantity</td>
 Unchanged: <td valign="top" width="439">Quantity of material required to produce the product (per unit of output).</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Calc. Quantity</td>
 Unchanged: <td valign="top" width="439">Quantity of material required to produce the product  (for the required output qty).  This will be same as above ,if the planned production qty is 1.</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Waste %</td>
 Unchanged: <td valign="top" width="439">Wastage ,if any , that may occur in the production process can be mentioned as % here.</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Net.Reqd</td>
 Unchanged: <td valign="top" width="439">Quantity of material required including waste%. Auto calculated.</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Adj.Qty</td>
 Unchanged: <td valign="top" width="439">Manual Addition or reduction of quantity, if any</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Final Qty</td>
 Unchanged: <td valign="top" width="439">Actual quantity of material required. Auto calculated.</td>
 Unchanged: </tr>
 Unchanged: <tr>
 Unchanged: <td valign="top" width="151">Nature</td>
 Unchanged: <td valign="top" width="439">The classification material during the process is specified.  Items marked under Input categories are used for requirement calculation and items marked under Output ,Scrap, By product are used as a norm.</td>
 Unchanged: </tr>
 Unchanged: </tbody>
 Unchanged: </table>
 Unchanged: &nbsp;
 Unchanged: &nbsp;
 Unchanged: s

Note: Spaces may be added to comparison text to allow better line wrapping.

Translate »